Set Buffering Fabric-Port (Hipri-Service-Ratio) - Avaya Cajun P550R Cli Reference Manual

Chapter 4

set buffering fabric-port (hipri-service-ratio)

Command Mode
Description
Syntax
To Enable:
Name
fabric-port-spec
routing
input|output
age-timer
hipri-service-ratio
Sample Output
Systems
4-4
Configuration
Set the input or output buffer priority threshold for a fabric
port. The default ratio is 999-to-1.
set buffering fabric-port <
[routing]
{input|output} hipri-service-ratio
{3-to-1|99-to-1|999-to-1|9999-to-1}
Table 4-3. Parameters, Keywords, Arguments
Definition
Enter a particular fabric port or a range of fabric ports on
a module.
Set the routing buffer parameters.
Input or output buffering.
The age-timer ranges are:
160-to-320
640-to-1280
The priority service ratios are: 3-to-1, 99-to-1, 999-to-1,
9999-to-1
The following example sets the buffer high priority
threshold ratio for fabric port 4/1 to 9999-to-1.
Cajun(configure)# set buffering fabric-port 4/1
routing input hipri-service-ratio 9999-to-1
Buffers for fabric-port 4/1 set.
P550/P550R/P880/P882
fabric-port-spec>
Cajun P550R/P880/P882 Command Reference Guide