Set Console Databits - Avaya Cajun P550R Cli Reference Manual

set console databits

Command Mode
Description
Syntax
To Enable:
Name
7|8
Sample Output
Systems
Cajun P550R/P880/P882 Command Reference Guide
Configuration
Sets the console serial port's databit width. The default value is 8.
* Note: This command is not applicable when the console serial
port is configured in PPP mode. The input will not be
accepted or stored when the console serial port is
configured in PPP mode.
However, if the console serial port is configured as TTY
mode and the databits width is configured, the console
serial port can be changed to PPP mode and the databit
width is saved until TTY mode is restored.
set console databits {7|8}
Table 5-2. Parameters, Keywords, Arguments
Definition
This is a required parameter. The number indicates
the number of bits used in the data stream.
This example sets the databit width for the console serial port to 7.
Cajun(configure)# set console databits 7
P550/P550R/P800/P882
Console
5-3