Set Buffering Fabric-Port (Hipri-Alloc) - Avaya Cajun P550R Cli Reference Manual

set buffering fabric-port (hipri-alloc)

Command Mode
Description
Syntax
To Enable:
Name
fabric-port-spec
routing
input|output
hipri-alloc
Sample Output
Systems
Cajun P550R/P880/P882 Command Reference Guide
Configuration
Set the input or output buffer high priority allocation
percentage. The default percentage value is 20%.
* Note: The switch must be rebooted for changes to this
parameter to take effect.
set buffering fabric-port <
[routing]
{input|output} hipri-alloc
{10|20|30|40|50}
Table 4-2. Parameters, Keywords, Arguments
Definition
Enter a particular fabric port or a range of fabric ports on
a module.
Set the routing buffer parameters.
Input or output buffering.
The high priority allocation percentage ranges are: 10,
20, 30, 40, or 50.
The following example sets the buffer high priority
allocation percentage for fabric port 4/1 to 30%.
Cajun(configure)# set buffering fabric-port 4/2
routing output hipri-alloc 30
Buffers for fabric-port 4/2 set.
P550/P550R/P880/P882
fabric-port-spec>
Buffering
4-3