Appletalk Static Cable-Range - Avaya Cajun P550R Cli Reference Manual

appletalk static cable-range

Command Mode
Description
Syntax
To Enable:
To Disable:
Name
cable-range
network.node
floating
zone
Cajun P550R/P880/P882 Command Reference Guide
Configuration
Create an appletalk static route. The no form of this
command removes the static route itself, or only removes a
zone from the static route if the zone name is supplied.
appletalk static cable-range <cable-range> to
<network.node> [floating] zone <zone-name>
[no] appletalk static cable-range <cable-range> to
<network.node>
Table 3-8. Parameters, Keywords, Arguments
Definition
The range of Appletalk network values to be used for this
static route. Specify start and end values, in decimal,
between 0 and 65279 and separate the values with a
hyphen.
The starting network number must be less than the
ending network number. The next hop appletalk router
is specified via the network.node parameter.
Specifies the Appletalk Network Address of the next hop
to the destination network. (Both numbers are in
decimal.)
• network - A 16-bit network number between 0
and 66279.
• node - An 8-bit node number between 0 and 254.
Specifies that a dynamic route update for this network
can replace the route entry created by this command.
The floating argument is optional. If supplied, the route
defined via this command may be overwritten by an
appletalk routing update. The default is to ignore
appletalk route updates for this cable range.
• zone-name - The zone-name specifies a zone
name to be associated with this destination.
When the keyword zone and the zone-name are
omitted, the static route is removed.
Appletalk
2-11