Set Console Stopbits - Avaya Cajun P550R Cli Reference Manual

set console stopbits

Command Mode
Name
1|2
Cajun P550R/P880/P882 Command Reference Guide
Configuration
Sets the serial console port stopbits to 1 or 2 bits wide. The default
setting is 1.
Stopbits is not compatible with the serial console port configured in
PPP mode. The stopbits parameter cannot be accepted or saved
when the serial console port is configured as PPP mode.
However, to configure the serial console port stopbits parameter,
the serial console port can be configued as TTY mode and the
stopbits parameter set. The serial console port can then be
reconfigued as PPP mode. The stopbits parameter is saved until the
console serial port is reconfigured as TTY mode.
Command Syntax
To Enable:
Table 5-6. Parameters, Keywords, Arguments
Definition
A required parameter that indicates to the serial
console port the width of the stopbits. Stopbits is not
compatible with the serial console port configured in
PPP mode.
Sample Output
This example sets the serial console port stopbits to 2 bits
wide
Cajun(configure)# set console stopbits 2
set console stopbits {1|2}
Console
5-7