Set Huntgroup 7-=2 - Avaya Cajun P550R Cli Reference Manual

Chapter 7
set huntgroup
Command Mode
Description
Syntax
To Enable:
To Disable:
Name
huntgroup-name
load-sharing
Sample Output
Systems
7-2
Configure
Creates a huntgroup, modify an existing huntgroup or remove a
huntgroup. If no load-sharing value is specified, then a huntgroup
is created with load-sharing enabled. Use the clear huntgroup form
of this command to remove a huntgroup.
set huntgroup <huntgroup-name> [load-sharing {enable|disable}]
clear huntgroup <huntgroup-name>
Table 7-1. Parameters, Keywords, Arguments
Definition
The unique string used to identify a huntgroup. If the
name is not unique to the huntgroup, then it is assumed
that an existing huntgroup is being modified.
The load sharing capability.
• enable|disable - Enables or disables load sharing.
The following example creates huntgroup hg1 and disables load-
sharing.
Cajun(configure)# set huntgroup hg1 load-sharing
disable
HuntGroup "hg1" created
P550/P550R/P880/P882
Cajun P550R/P880/P882 Command Reference Guide