How To Change The Melody - Hitachi RZ-V100CYH Operating Instruction And Cook Book

How to Change the Melody

●
A melody notifies you that the rice cooking process has been started and completed.
●
The default sound is "Melody (Standard)".
The sound can be switched to "Melody (Low)", "Beep", or "Silent". Use the following steps to change the sound.
●
If you select "Silent", a notification sound that notifies you of incorrect operations cannot be put on mute.
1
*The indication of the type of rice and program is provided as an example.
1
Insert the power plug into a
power outlet
2
Press
five seconds to switch to a mode
in which to change settings.
3
Press
●
The display will be switched each time you press
●
Press
move back to the previous setting.
4
Press
●
Press
5
Press
●
The display changes each time you press
●
Press
move back to the previous setting.
6
Press
●
Pressing
screen returns to the initial display.
E-16
for approximately
or to show "P1-" on the display.
to move to the next setting. Press
.
to change the alarm melody setting.
or to switch the settings.
to move to the next setting. Press
to confirm your settings.
enters your settings and the
3 5 2 4
Lights up
or .
(Setting the
melody of an LCD display)
to
alarm)
Lights up
or .
(Melody -
to
Standard)
6
●
Pressing the "Cancel/off"
button enables you to return to
the initial view even during
setup. Any settings you have
not confirmed will be reset.
(Setting the (Setting Plate Condensation (If you are concerned
Reduction mode) about odors)
P.E-15 P.E-17 P.E-34
●
The melody corresponding to the displayed
number sounds each time the option is changed.
(Melody - (Beep) (Silent)
Low)
●
If no operation is performed for
approximately three minutes,
your setting is automatically
accepted.