How To Switch Lcd Displays - Hitachi RZ-V100CYH Operating Instruction And Cook Book

How to Switch LCD Displays

(To display the clock even when the power plug is disconnected from the power outlet)
●
By default, the clock display is disabled.
Use the following steps to enable it.
●
If the rice cooker is unplugged when the LCD display is operated on the built-in battery, the display may become dim
and then return to normal. This is because the power source is switching to its built-in battery, and is not a malfunction.
1
*The indication of the type of rice and program is provided as an example.
1
Insert the power plug into a power
outlet
2
Press
five seconds to switch to a mode
in which to change settings.
3
Press or
on the display.
●
Press to move to the next item. Press
to move back to the previous item.
4
Press
●
Press to change the LCD display setting.
5
Press or
settings.
●
The display changes each time you press
6
Press
●
Pressing
screen returns to the initial display.
for approximately
to show "P2-"
.
to switch the
or
to confirm your settings.
enters your settings and the
3 5 2 4 6
Lights up
(Setting the melody (Setting the
of an alarm) LCD display)
P.E-16
Lights up
(Goes off)
.
The display shown after enabling
the clock display
(When the rice cooker is unplugged)
●
Pressing the "Cancel/Off"
button enables you to return to
the initial view even during
setup. Any settings you have
not confirmed will be reset.
(Setting Plate Condensation (If you are concerned
Reduction mode) about odors)
P.E-17 P.E-34
(Lights up)
●
If no operation is performed for
approximately three minutes,
your setting is automatically
accepted.
E-15