Setting The Current Time - Hitachi RZ-V100CYH Operating Instruction And Cook Book

Setting the Current Time

●
When the appliance is unplugged, the display will be disabled, however, the clock operates on a built-in battery.
●
You can configure the display to show the current time on the LCD display even when the power plug is disconnected.
●
The clock may lose time by approximately two minutes per month, depending on the room temperature. If this is
the case, use the following steps to set the clock to the current time.
1
Example: To change "7:00" to "20:30" *The indication of the type of rice and program is provided as an example.
1
Insert the power plug into a
power outlet
2
Press
approximately one second to
flash the time display.
3
Press
●
The time changes each time you press
· The clock goes back in one-minute increments
each time
one-minute increments each time
· Continuously pressing either of these buttons turns the
clock forward or backward in 10-minute increments.
4
Press
time.
●
The time display changes from blinking to
always on.
E-14
4
or for
or to set the time to "20:30"
is pressed. It moves forward in
is pressed.
to finish setting the
2 3
A beep is emitted and
the display flashes
or .
Lights up
●
The time cannot be adjusted
during Cooking, Keep Warm,
Timer Cooking, or Reheating.
●
The selected cooking program
and the current time are
displayed.
Pressing the "1-2 person" button
for approximately three seconds
while the current time is flashing
will cause the clock to display
"12:00" (12:00 noon) and the clock
returns to the initial value.
●
The clock displays time in a
24-hour format, in which 12
a.m. is 0:00, 12 p.m. is 12:00,
and so on.
●
The time adjustment will be
automatically completed after
approximately one minute
unless you press the
"Cancel/off" button.
Minute
To check the current time
during Cooking, Keep Warm,
Timer Cooking, or Reheating:
The current time is displayed for
three seconds when
is pressed, and then the clock
returns to the original display.
or