Alesis Fusion 6 HD Service Manual page 206

FPGA
1) Press the soft button that corresponds to the text "FPGA" on the right hand side of the
display. The LCD should display the following for a successful test:
EFFECTS
1) Press the soft button that corresponds to the text "Effects" on the right hand side of the
display. The LCD should display the following:
2) Verify that all the tests have passed. Note that the test can be redone by pressing the soft
button that corresponds to "Effects" again.
ENGINE
1) Press the soft button that corresponds to the text "Engine" on the right hand side of the
display. The LCD should display the following:
2) Note that the text "Voice Engine" is highlighted. Press "PLAY" to test the Voice Engine
memory. The test will take about 10 seconds, and a progress bar will be displayed during the
test.