Alesis Fusion 6 HD Service Manual page 167

1. REMOVAL OF TOP PANEL AND CHASSIS BOTTOM (Fig.1)
(A) REMOVE 19 SCREWS TO SEPARATE TOP PANEL AND CHASSIS BOTTOM.
(B) SEPARATE TOP PANEL AND CHASSIS WITH THE DIRECTION SHOWN.
3 / REMOVAL OF SHIELD PLATE,SATA PCB, SWITCHING POWER PCB AND FAN (Fig.2)
(A) REMOVE 4 CABLES AND 8 SCREWS TO TAKE OFF SHIELD PLATE.
(B) REMOVE THE CABLE AND 2 SCREWS TO TAKE OFF THE SATA PCB.
(C) REMOVE 2 SCREWS TO TAKE OUT THE FAN.
(D) REMOVE THE CABLE AND 4 SCREWS TO SEPARATE THE SWITCHING POWER PCB.
DISASSEMBLY PROCEDURES DISASSEMBLY PROCEDURES
DISASSEMBLY PROCEDURES DISASSEMBLY PROCEDURES
)G j h / 2 *!
)G j h / 3 *!
!