Alesis Fusion 6 HD Service Manual page 205

MEMORY TEST
FLASH
1) Press the soft button that corresponds to the text "Memory" on the left hand side of the
display. The LCD should display the following:
Note that "Flash" is highlighted on the right hand side of the display. If this is not the case,
press the soft button that corresponds to the text "Flash" on the right hand side of the display.
2) Verify that the Flash ID's are labeled as shown below
Verify that both the Serial EEPROM Test and Real Time Clock Test passed.
The tests can be redone by pressing the soft button that corresponds to "Flash."
PROCESSOR MEMORY
1) Press the soft button that corresponds to the text "Processor" on the right hand side of the
display. The LCD should display the following:
2) Verify that the Host ID and Revision is as shown.
3) Verify that the "VEngine Total Mem" and VEngine 2 Total Mem" are both 64MB.