Alesis Fusion 6 HD Service Manual page 169

6 / ! REMOVAL OF 5 PCS OF KNOBS , WHEEL ENCODER AND MOUNTING NUTS(Fig.5) !
(A) REMOVE WHEEL ENCODER AND MOUNTING NUT FROM PANEL RIGHT.
(B) REMOVE 5 KNOBS AND MOUNTING NUTS FROM PANEL LEFT.
!
7 / ! REMOVAL OF LCD MODULE, INVERTER PCB AND DIMMER PCB AND FRONT PANEL
RIGHT PCB (Fig.6) !
(A) REMOVE 4 SCREWS TO TAKE OFF TINFOIL.
(B) REMOVE 4 SCREWS TO TAKE OFF LCD MODULE.
(C) REMOVE 2 SCREWS TO TAKE OFF DIMMER PCB.
(D) REMOVE 2 SCREWS TO TAKE OFF INVERTER PCB.
(E) REMOVE 12 SCREWS TO TAKE OFF RIGHT PCB.
)G j h / 6 *
)G j h / 7 *!
!