Alesis Fusion 6 HD Service Manual page 195

Verify that the STATUS, DATA1, DATA2, CHAN, NOTE, and EVENT columns on the PC
match the picture.
USB
1) Press the soft button that corresponds to the text "USB" on the right hand side of the
display. The LCD should display the following:
2) Verify the following:
Initialization: Successful
Interrupt Test: Pass
3) Connect a USB cable from a PC running either Windows 2000 or Windows XP and verify
that the File Transfer Mode Window appears, as shown below:
4) And as instructed on the display, remember to "dismount" the unit under test
from the computer before unplugging the computer.
1. To dismount the unit under test, left click on the "Unplug or Eject Hardware" icon
shown below.
2. Left click on the pop-up message that says "Stop USB Mass Storage Device – Drives
(J:,K:)." Note that the two drive letters will vary from computer to computer.