Alesis Fusion 6 HD Service Manual page 168

3. REMOVAL OF EXPANSION DIGITAL PCB, ANALOG IO PCB AND HARD DISC (Fig.3)
(A) REMOVE 1 SCREW AND INSULATOR SHEET TO TAKE OFF EXPANSION DIGITAL PCB.
(B) REMOVE THE CABLES AND 7 1/4" JACK NUTS FROM REAR PANEL TO TAKE OUT THE
ANALOG IO PCB.
(C) REMOVE 4 SCREWS AND CABLES TO TAKE OUT THE HARD DISC.
5 / ! REMOVAL OF MAIN PCB AND EXPANSION ANALOG PCB (Fig.4) !
(A) REMOVE 3 1/4" JACK NUTS AND 2 SCREW FROM REAR PANEL.
REMOVE 4 BRASS STANDOFF FROM MAIN PCB.
)C *
REMOVE 4 SCREWS TO TAKE OUT MAIN PCB.
)D *
REMOVE 8 1/4" JACK NUTS FROM REAR PANEL TO TAKE OUT EXPANSION ANALOG PCB.
)E *
)G j h / 4 *!
!
!
!
)G j h / 5 *!
!
!!