Refilling Liquid Process Chemicals - Miele PG 8583 CD Operating Instructions Manual

Adding and dispensing process chemicals
Refilling liquid
process chemi-
cals
52
Open the drawer of the side unit.

Remove the liquid process chemical container (blue marking) and

place it on the open cabinet door or on a surface which is robust
and easy to clean.
Take the lid off the canister and remove the suction wand. Place the

suction wand on the open wash cabinet door.
Replace the empty container with a full one.

Push the suction wand into the opening of the container and secure

the lid. Observe the color coding.
Feed the suction wand into the container until it reaches the bot-

tom.
Wipe up any spilled process chemical thoroughly.

Place the container back in the drawer in the side cabinet.

Close the drawer. Ensure that the dispensing tubes and cords are

not kinked or trapped.
After that, the dispensing system must be primed (see "Settings  /

Priming DOS").