Miele PG 8583 CD Operating Instructions Manual page 145

Problem
The cleaning result is un-
satisfactory.
Items made of glass are
showing signs of corro-
sion.
Possible cause and solution
Mobile units, baskets, modules and inserts were not suit-
able for the load.
Select mobile units, baskets, modules and inserts which

are suitable for the task.
Mobile units, baskets, inserts and modules were incorrectly
loaded or overloaded.
Arrange the wash load correctly according to the infor-

mation in the operating instructions. according to the in-
formation in the operating instructions.
Avoid overloading the mobile units, baskets, modules

and inserts.
The program was not suitable for the soiling.
Select a suitable program.

or
Adjust the parameters to suit the task.

A spray arm is blocked.
Ensure the spray arms are not obstructed when arrang-

ing the wash load.
Injector nozzles on the mobile units, baskets, modules or
inserts are blocked.
Check the nozzles and clean them as necessary.

The filters in the wash chamber are dirty.
Check the filters and clean them if necessary.

Mobile units, baskets or modules were not correctly
mounted on the water connection.
Check the adapter.

The items are not suitable for machine reprocessing.
Only use items which are declared by their manufacturer

as suitable for machine reprocessing.
Neutralization has not taken place during the program.
Check the level in the reservoir and vent the dispensing

system if necessary.
The wash temperature was too high.
Select a different program.

or
Reduce the wash temperature.

The process chemicals used were too alkaline.
Use a milder process chemical.

or
Reduce the concentration of process chemicals.

Frequently asked questions
145