Program Blocks - Miele PG 8583 CD Operating Instructions Manual

Program settings

Program blocks

100
The wash block sequence is predefined and is the same as in the
program chart (see "Program chart").
- Pre-rinse 1 to 3
Pre-washing removes coarse soiling and foam-building substances.
Main wash 1 2
- and
Depending on the wash load, cleaning generally occurs at tempera-
tures between 104 - 140°F (50°C and 85°C) with the addition of an
appropriate cleaning detergents.
Interim rinse 1 4
- to
In the interim rinse stages the process chemicals from the previous
wash blocks are rinsed off and neutralized where necessary by the
addition of neutralizing agents.
Final rinse 1 2
- to
To avoid deposits on the wash load, demineralized (DI) water
should preferably be used if available for the final rinse.
Drying
-
Adequate drying reduces residual moisture on the load.