Setting The Concentration - Miele PG 8583 CD Operating Instructions Manual

Program settings
Setting the con-
centration
110
Up to two process chemicals can be dispensed in each wash block.
It is also possible to control the same dispensing system twice.
...
Dosage 1 Dosage 2
 or
Dispensing system

Dispensing system
The number of dispensing systems can vary according to model and
the number of connected DOS modules.
Select an option using the  and  arrow buttons and save your

choice with OK.
Then you can set the dispensing concentration in % (percent).
Adjustment is in increments of 0.01%. The possible range is shown in
the bottom line.
Use the arrow buttons  (higher) and  (lower) to set the dispens-

ing concentration.
Press OK to save the setting.

DOS 1 ...
DOS ...
DOS
0.30 %
(0.05 - 2.00 %)