Miele PG 8583 CD Operating Instructions Manual page 92

Additional settings
Configuring the
interface
Ethernet
92
 The interface must only be configured by suitably qualified and
competent persons.
Open the menu as follows:

 button
Additional settings

Interface

Interface
Ethernet
-
Configuration of an Ethernet interface.
RS232
-
Configuration of a serial RS232 interface.
Select the type of interface and press OK to confirm your selection.

The parameters for the interface must be configured next.
- Module status
Connection status displayed (
Address status
-
List of interface parameters, e.g. IP address, Subnet mask etc.
DHCP
-
The Ethernet interface can either be implemented via a Dynamic
Host Configuration Protocol (DHCP) or by setting the following pa-
rameters:
IP address
–
– Subnet mask
– Standard gateway
– DNS Server - automatic
DNS Server 1
–
DNS Server 2
–
Port type
–
Port
–
Ethernet
RS232
Active Inactive
/ ).