Program Blocks - Miele PLW 6111 Operating Instructions Manual

PROGRAMS
Program
AD rinse
Drying
Drain
Fill DOS1
Fill DOS2
Fill DOS3
Fill DOS4
8.1

Program blocks


Drain
Drains water from the wash cabinet.

Pre-rinse
A pre-rinse removes coarse stains and substances which may cause foaming.

Main wash
Depending on the wash items, cleaning generally occurs at temperatures between 45°C
and 93°C (113°F and 199°F) with the addition of appropriate detergent (process
chemicals).

Interim rinse
In the interim rinse stages, chemicals from the previous phases are rinsed off and
neutralized.

Final rinse
To avoid deposits on the wash items and to reduce process chemical residues, fully
demineralized water should preferably be used, if available, for the final rinse.

Drying
Adequate drying reduces the risk of corrosion through residual moisture on the wash
items.
REV.0.01_COD.650184_A4
Button Application
Rinse with fully demineralized water (DI water, (ultra)pure water),

holding time: 3 minutes.
 Additional drying after the end of a program.
 For draining wash water, e.g., after a program cancellation.
Primes the detergent dispenser system after replenishing or

replacing the container.
Primes the additional liquid agent dispensing system after

replenishing or replacing the container.
Primes the neutralizing agent dispensing system after

replenishing or replacing the container.
Primes the additional liquid agent dispensing system after

replenishing or replacing the container.
Page 34