Configuration - Honeywell ESSER Fire Alarm Control Panel Compact Commissioning Instruction

Fire Alarm Control Panel Compact
5.5

Configuration

The interfaces and the inputs and outputs of the mainboard are configured in this menu. Only the EDP protocol
is implemented for the RS485 interface.
configuration
1 zones
2 control zones
- detector/transponder
4 configuration
5 settings
6 verify and save
3
configuration
1 mainboard
2 slot 1
3 slot 2
4 expansion module
3
mainboard
1 Out-1 : monitored
2 Out-2 : monitored
3 Out-3 : EOL-O
4 Out-4 : EOL-O
IN-1 : open / closed
IN-2 : open/ closed
7 IN-3 : 3.3k / 680 Ohm
mainboard
1 IN-4 : open / closed
- zones
- esserbus
4 RS485 : unused
5 RS232 : unused
Fig. 31: > Configuration< menu screens
20
3
4
GHI
3
1
1/2
3
2/2
3
RS485  toggle between unused, FIP / FOP and WINMAG
The WINMAG setting serves the connection to a higher-level
Management Systems with the EDP protocol.
RS232  for future use
FB 798238.GB0 / 10.14