Honeywell ESSER Fire Alarm Control Panel Compact Commissioning Instruction page 2

Fire Alarm Control Panel Compact
Intended use
This product may only be used for the applications outlined in the catalogue and the technical description and in
combination with external devices and components which have been recommended or approved by us.
Warning
To ensure correct and safe operation of the product, all instructions concerning its proper transport, storage,
installation and mounting must be observed and it must be operated with care.
Safety-relevant user information
These instructions include all information required for the intended use of the products described
The term "qualified personnel" in the context of the safety information included in these instructions or on the
product itself designates:

project planning personnel that are familiar with the safety guidelines concerning fire alarm and
extinguishing systems.

maintenance personnel that have been instructed in the operation of the components of fire alarm and
extinguishing systems and are familiar with the information on their operation as included in these
instructions.

trained installation and service personnel with the necessary qualification for carrying out repairs on
such components of fire alarm and extinguishing systems or who are authorised to commission, ground
and label electrical circuits and devices/systems according to the standards of security technology.
Safety warnings
The following information is given in the interest of your personal safety and to prevent damage to the
product described in these instructions and all devices connected to it.
Safety information and warnings to prevent hazards to life and health of users or maintenance personnel and
to prevent damage to property are marked by the symbols defined below. Within the context of these
instructions, these symbols have the following meaning:
Indicates that serious injury, fatality or considerable property damage might result if the
specified precautions are not complied with.
Draws particular attention to important information about the product or a part of the
instructions.
§
Instructions regarding the configuration and commissioning according to national and local
regulations, requirements and applicable standards must be complied with.
Dismantling
In accordance with Directive 2002/96/EC (WEEE), the electrical and electronic equipment can
be returned to the manufacturer for proper disposal after it has been dismantled.
2
FB 798238.GB0 / 10.14