Access Authorisation - Honeywell ESSER Fire Alarm Control Panel Compact Commissioning Instruction

Fire Alarm Control Panel Compact
3.1

Access authorisation

Keyboard entry is inhibited during normal operation. Access is only possible at access level 2.
ESSER
by Honeywell
28.06.2012
Compact
Fig. 7: Display during normal operation of the FACP
Press key and enter the code for access level 2.
Access level 3 (installer level)
Only qualified staff may make changes, settings or enter data at this access level. An incorrect setting or data
entry can impair the function of the FACP.
main menu
1 information
2 overview
3 operate
4 enter access level 3
2
Fig. 8: Service menu
code entry
code: ****
Fig. 9: Entry of access code
Access code for keyboard enable at the installer level
The numeric code for access level 3 (installer level) set by the factory is listed in the following table.
This code should be changed after the installation technician has finished commissioning and the new code
should be entered in the table.
123 factory default setting for access level 3 (no more than 8 digits)
10
12:00:00
2
2 3
1
ABC DEF
4 5 6
GHI JKL MNO
Selection by entering digits 1-4.
7 8 9
PQRS TUV WXYZ
ESC 0 CLR
To enable, enter the access code (which must not exceed 8
digits) and then confirm by pressing the key.
FB 798238.GB0 / 10.14