Ethernet Connection Procedure - Omron Sysmac NY Series Hardware User Manual

5-5-3

Ethernet Connection Procedure

Use the following procedure to connect the Ethernet connectors of the IPC Machine Controller.
1
Remove the dust caps from the Ethernet ports to be connected.
2
Connect Ethernet Port 1 of the Box PC to a normal Ethernet network.
3
Connect Ethernet port 2 of the Box PC to the Ethernet/IP network.
4
Connect Ethernet port 3 of the Box PC to the EtherCAT network.
Additional Information
• Refer to the NY-series IPC Machine Controller Industrial Panel PC / Industrial Box PC Built-in
EtherNet/IP Port User's Manual (Cat. No. W563) for Ethernet/IP port details.
• Refer to the NY-series IPC Machine Controller Industrial Panel PC / Industrial Box PC Built-in
EtherCAT Port User's Manual (Cat. No. W562) for EtherCAT port details.
The Ethernet connectors are connected.
NY-series Industrial Box PC Machine Controller Hardware User's Manual (W556)
5 Installation
5
5-43