Connector Specifications; Power Connector Specifications - Omron Sysmac NY Series Hardware User Manual

4-2

Connector Specifications

This section provides the Connector Specifications of the IPC Machine Controller.
4-2-1

Power Connector Specifications

The power supply connector is locked when inserted to prevent unintentional disconnection.
The connector can only be inserted the correct way.
The connector is a Phoenix Contact type SPC5/2-STCL-7.62 BK (1711708).
The Box PC provides protection against reverse polarity.
1
The pin layout represents the power connector on the Box PC.
Pin
1 24 VDC
2 0 VDC
Conductor isolation rating
Termination rating
Additional Information
• Refer to 5-4-3 Wire the Power Connector on page 5-35 for wiring details.
• Refer to 5-4-2 Ground on page 5-28 for grounding details.
NY-series Industrial Box PC Machine Controller Hardware User's Manual (W556)
2
Item
Description
Specifications
90°C
90°C
4 Specifications
4
4-13