Power On; Power On Using The Power Button; Power On Using The Power On/Off Input - Omron Sysmac NY Series Hardware User Manual

6 Operating Procedures
6-1

Power ON

This section provides Power ON details.
6-1-1

Power ON Using the Power Button

Start condition: Power is supplied to the Box PC and the Box PC is OFF.
1
Press the power button and release within 1 second.
Refer to 3-3 Power Button on page 3-11 for the power button location.
The Box PC starts and the PWR LED will turn ON.
2
Wait until the PWR LED is ON and verify that the ERR LED is OFF.
The Box PC is ON and the Operating System, if installed, starts.
6-1-2

Power ON Using the Power ON/OFF Input

Start condition: Power is supplied to the Box PC and the Box PC is OFF.
1
Supply an input signal to pins 3 and 4 of the I/O connector.
The input signal must remain ON for a minimum of 60 ms and a maximum of 750 ms to be
correctly detected by the Box PC.
The Box PC starts and the PWR LED will turn ON.
2
Wait until the PWR LED is ON and verify that the ERR LED is OFF.
The Box PC is ON and the Operating System, if installed, starts.
Additional Information
• Refer to 4-2-2 I/O Connector Specifications on page 4-14 for connector specifications.
• Refer to 5-4-4 Wire the I/O Connector on page 5-38 for wiring details.
6-2
NY-series Industrial Box PC Machine Controller Hardware User's Manual (W556)