5 Installation
• Create a power interruption
• Monitor the shutdown sequence and confirm a correct shutdown sequence
The UPS is connected and configured.
The Box PC will shut down properly in case of a power supply interruption and restart automatically
when the power is restored.
Additional Information
• The default Input sensitivity setting is Standard voltage sensitivity and this is correct.
Do not set this parameter to Low voltage sensitivity. Doing so can cause a system malfunc-
tion when switching to battery mode.
• Do not use the Simple Shutdown Software because it can not Power OFF the IPC Machine
Controller.
5-46
NY-series Industrial Box PC Machine Controller Hardware User's Manual (W556)