Battery And Fan Replacement; Product Replacement; Cleaning, Maintenance And Disposal - Omron Sysmac NY Series Hardware User Manual

home offsets from the list of data items to restore, and then restore the data. Then, define the abso-
lute encoder home again. If you do not define home, unintended operation of the controlled system
may occur.
• The Servomotor or Servo Drive was changed since the data was backed up.
• The absolute encoder was set up after the data was backed up.
• The absolute data for the absolute encoder was lost.
• You can partially or cannot at all back up, restore, or compare data of the settings depending on
slaves and Units. Also, you cannot back up, restore, or compare data for disabled slaves or Units.
After you restore data, sufficiently confirm that operation is correct before you start actual operation.

Battery and Fan Replacement

Applicable for products with a cooling layer that has a removable cover.
• Dispose of any Battery that has been dropped on the floor or otherwise subjected to excessive
shock. Batteries that have been subjected to shock may leak if they are used.
• UL standards require that only an experienced engineer replace the Battery. Make sure that an ex-
perienced engineer is in charge of Battery replacement.
• The Battery may leak, rupture, heat, or ignite. Never short-circuit, charge, disassemble, heat, or in-
cinerate the Battery or subject it to strong shock.
• If the storage period exceeds 6 months, check the performance of the fan unit before production
starts.

Product Replacement

• Make sure that the required data, including the user program, configurations, settings and variables
is transferred to a product that was replaced and to externally connected devices before restarting
operation.
Be sure to include the tag data link settings and routing tables, which are stored in the product.

Cleaning, Maintenance and Disposal

• Do not use corrosive substances to clean the product. Doing so may result in the failure or malfunc-
tion.
• Dispose of the product and batteries according to local ordinances as they apply.
• Dispose in accordance with applicable regulations.
• The following information must be displayed for all products that contain primary lithium batteries
with a perchlorate content of 6 ppb or higher when shipped to or transported through the State of
California, USA.
Perchlorate Material - special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
NY-series Industrial Box PC Machine Controller Hardware User's Manual (W556)
Precautions for Safe Use
25