Versions; Check Unit Versions; Check Hardware Revision - Omron Sysmac NY Series Hardware User Manual

Versions

Hardware revisions and unit versions are used to manage the hardware and software in NY-series
products. The hardware revision or unit version is updated each time there is a change in hardware or
software specifications. Even when two products have the same model number, they will have func-
tional or performance differences if they have different hardware revisions or unit versions.

Check Unit Versions

You can check unit versions on the ID Information Label or with the Sysmac Studio.
Check Unit Versions on ID Information Label
The unit version is given on the ID information label on the product.
Additional Information
• Refer to 3-1-2 Base Layer on page 3-5 for the label location.
• Refer to 1-3 ID Information Label on page 1-5 for label details.
Check Unit Versions with the Sysmac Studio
You can use the Sysmac Studio to check unit versions.
Additional Information
Refer to the NY-series IPC Machine Controller Industrial Panel PC / Industrial Box PC Software
User's Manual (Cat. No. W558) for the Sysmac Studio procedures to determine versions.

Check Hardware Revision

You can check the hardware revision with the Industrial PC Support Utility or with the Sysmac Studio.
The hardware revision is not displayed on the ID Information Label.
Check Hardware Revision with the Industrial PC Support Utility
You can check the hardware revision version with the Industrial PC Support Utility.
Additional Information
Refer to NY-series IPC Machine Controller Industrial Panel PC / Industrial Box PC Setup User's
Manual (Cat. No. W568) for Industrial PC Support Utility details.
NY-series Industrial Box PC Machine Controller Hardware User's Manual (W556)
Versions
33