Omron Sysmac NY Series Hardware User Manual page 210

Appendices
BIOS - Boot
Provides Boot information and configuration settings.
Changeable BIOS Boot parameters and their factory default values:
Quiet Boot
Setup Prompt Timeout
Bootup NumLock State
Battery Support
Power Loss Control
CSM & Option ROM Control
Enter Setup If No Boot Device
Enable Popup Boot Menu
Type Based Boot Priority
UEFI Fast Boot
*1. Power Loss Control settings are :
Remain OFF: The Box PC will stay OFF when power is supplied to the power connector
Turn ON: The Box PC will automatically start up when power is supplied to the power connector.
Last State: The Box PC will start up or remain OFF when power is supplied based on the Box PC state at
the moment power was removed from the power connector.
*2. In Main BIOS version A£27R111 and onward.
A-10
Item
*1
Launch CSM
Boot Option Filter
PXE Option ROM Launch Policy
Storage Option ROM Launch Policy Legacy ROM Only
Video Option ROM Launch Policy
Other Option ROM Launch Policy
Gate A20 Active
Option ROM Messages
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
5th Boot Device
6th Boot Device
7th Boot Device
8th Boot Device
NY-series Industrial Box PC Machine Controller Hardware User's Manual (W556)
Default / Remark
Disabled
1
On
Auto (Battery Manager)
Remain Off
Enabled
UEFI and Legacy
UEFI ROM Only
Legacy ROM Only
UEFI ROM Only
Upon Request
Force BIOS
No
Yes
SATA 2 Drive
Disabled
*2
SATA 3 Drive
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled