Reverse Door Swing; Remove The Door Assembly; Reverse The Strike - Kenmore Oasis 110.67032600 Manual

REVERSE DOOR SWING

Excessive Weight Hazard
Use two or more people to move and
install dryer.
Failure to do so can result in back or
other injury.
You can change your door swing from a right-
side opening to a left-side opening, if de-
sired.
1. Place a towel or soft cloth on top of the
dryer or work space to protect the sur-
face.

REMOVE THE DOOR ASSEMBLY

1. Open the dryer door.
2. Remove the bottom screw from each of
the 2 hinges that attach the dryer door to
the front panel of the dryer.
3. Loosen the top screw from each of the 2
hinges in Step 2.
A. Loosen these screws.
B. Remove these screws.
4. Remove the dryer door and the hinges
by lifting upward on the door. Lay the
door on a flat, protected surface, with the
inside of the door facing up. Remove re-
maining 2 loose screws from dryer front
panel.
5. Remove the 4 plastic plug strips located
outside the dryer door opening.
6. Install 4 plastic plug strips into screw
holes in the dryer left when the hinges
were removed in Step 4.

REVERSE THE STRIKE

1. Remove the door strike from the dryer
door opening.
2. Remove the cosmetic screw opposite the
door strike.
A
A
B
A
B
3. Reinstall the door strike and cosmetic
screw on the opposite side of the dryer
door opening from where they were re-
moved.
NOTE: Door strike and plug strips must
be on the same side of the dryer door
opening.
2-22
A. Door strike
B. Cosmetic screw
B