g) Slide the belt off the back of the drum
and remove it.
h) Pull drum out front of cabinet and re-
move it.
REASSEMBLY NOTE: When you reinstall
the drum and belt, install the belt around the
motor pulley before you install the front bulk-
head. Both the front and rear drum seals must
be flared.
Drive Belt Routing
Front View
Slide Belt Off
Back Of Drum
4.
To remove a front roller:
a) Perform steps 3a through 3e to re-
move the front bulkhead.
b) On the front bulkhead, push the trian-
gular clip off the grooved slot in the
roller shaft, and pull the roller off the
shaft.
Triangular Clip
Front Rollers
5.
To remove a rear roller:
a) Remove the belt and drum (perform
step 3).
b) On the rear bulkhead, push the trian-
gular clip off the grooved slot in the
roller shaft, and pull the roller off the
shaft.
Triangular Clip
Rear Bulkhead
4-16
Front Bulkhead
Rear Rollers