Loading A Still Image; Loading A Still Image From A Usb Flash Drive - Roland V-1HD+ Reference Manual

Video Operations

Loading a Still Image

You can load a still image, and output it in the same way as video (p. 22) or use it as a source for DSK compositing (p. 29). There are two ways to
load a still image: you can load from a USB flash drive, or you can capture from input video.
You can save up to four still images in the unit.
* When still images are saved in the unit, startup takes longer time according to image size and the number of still images saved.

Loading a Still Image from a USB Flash Drive

Here's how to load a still image from a USB flash drive into the unit.
NOTE
5 Still images cannot be scaled. In advance, you must prepare
still images of the resolution that is appropriate for your
output format.
5 When using a USB flash drive for the first time, you must
format it using this unit (p. 39).
5 Never turn off the power or remove the USB flash drive while
the message "PLEASE WAIT" is shown.
5 Depending on the USB flash drive, recognition of the flash
drive might take some time.
Formats supported for loading
Windows Bitmap file (.bmp), 24-bit color, uncompressed
Format
PNG file (.png), 24-bit color
* Alpha channel is not supported.
Resolution Maximum 1920 x 1080 pixels
No more than 28 single-byte alphanumeric characters
File name
* The extension ".bmp" or ".png " must be added.
20
Loading a still image
1
Save the still image in the root directory of the USB flash
drive.
2
Connect the USB flash drive containing the still image to
the USB MEMORY port.
3
[MENU] button 0 "STILL IMAGE" 0 select "LOAD FROM
USB MEMORY," and press the [VALUE] knob.
4
Use the [VALUE] knob to select the loading destination
for the still image (STILL 1–4), and press the [VALUE] knob.
A list of the still images in the USB flash drive is shown.
5
Use the [VALUE] knob to select the still image file you
want to load, and press the [VALUE] knob.
A confirmation message appears.
* If you want to cancel the operation, press the [MENU] button.
6
Use the [VALUE] knob to select "YES," and press the
[VALUE] knob.
The still image is loaded into the unit. When the operation is
finished, the message "COMPLETE" appears.
* Large-size still-image files and PNG files might take some time to
load.
7
Press the [MENU] button several times to close the menu.
A " " symbol is displayed
for memory where a still
image is already saved.