List Of Commands - Roland V-1HD+ Reference Manual

RS-232 Command Reference

List of Commands

* When sending a sequence of commands to this unit from a controller, after each one, be sure to verify that an "ack" response is returned before
sending the next command.
Video operations
Item
Select video source for INPUT 1–4
Select video output from the OUTPUT 1 connector
Select video output from the OUTPUT 2 connector
Select final output video
Select preview output video
Select transition effect
Set video transition time
Press the [CUT] button
Press the [AUTO] button
Press the [PinP] button
Press the [SPLIT] button
Press the [DSK ON] button
Press the [DSK PVW] button
PinP Adjust position of inset screen
Adjust size of the inset screen.
Adjust zoom ratio of inset screen video
Set the fade-in/out time for the inset screen
Split Adjust position of the video
Adjust the boundary position
DSK Adjust the key level (amount of extraction)
Adjust the key gain (semi-transmissive region) stxKYG:a;
Set the fade-in/out time for the source video
Turn the [OUTPUT FADE] knob
62
Sent Response
Parameter
command command
stxIPS:a,b; ack a =
b =
stxOH1:a; ack a = 0 (PGM), 1 (PVW), 2 (Multi-View)
stxOH2:a; ack a = 0 (PGM), 1 (PVW), 2 (Multi-View)
stxPGM:a; ack a = 0 (INPUT 1), 1 (INPUT 2), 2 (INPUT 3), 3 (INPUT 4)
stxPST:a; ack a = 0 (INPUT 1), 1 (INPUT 2), 2 (INPUT 3), 3 (INPUT 4)
stxTRS:a; ack a = 0 (MIX), 1 (WIPE)
stxTIM:a; ack a = 0 (0.0 sec)–40 (4.0 sec)
stxCUT; ack
stxATO; ack
stxP1S; ack
stxSPS; ack
stxDSK; ack
stxDVW; ack
ack
stxPP1:a,b; a =
b =
ack
stxPPS:a; a = 100 (10.0%)–1000 (100.0%)
ack
stxPPZ:a; a = 100 (100.0%)–400 (400.0%)
ack
stxPTM:a; a = 0 (0.0 sec)–40 (4.0 sec)
ack
stxSPT:a,b; When the split composition type is "SPLIT V"
Adjusts the position in the horizontal direction.
a =
b =
When the split composition type is "SPLIT H"
Adjusts the position in the vertical direction.
a =
b =
ack
stxSCP:a; a = -500–500
ack
stxKYL:a; a = 0–255
ack
a = 0–255
ack
stxPTM:a; a = 0 (0.0 sec)–40 (4.0 sec)
ack
stxOFD:a; a = -63–64
0 (INPUT 1), 1 (INPUT 2), 2 (INPUT 3), 3 (INPUT 4)
0 (HDMI), 1 (STILL 1), 2 (STILL 2), 3 (STILL 3), 4 (STILL 4)
-500–500 Horizontal position
-500–500 Vertical position
-500–500 video on the left (Video on the A/PGM bus)
-500–500 video on the right (Video on the B/PST bus)
-500–500 upper video (Video on the A/PGM bus)
-500–500 lower video (Video on the B/PST bus)