Table of Contents
Advertisement
5. Press Zoom In or Zoom Out to adjust the setting. The values range from 128 to 1023.
6. Do one of the following:
5
This command is not supported with Manchester.
Camera and Lens Functions
If you are finished making changes, continue with step 6.
Press Zoom In to increase the value of the setting.
Press Zoom Out to decrease value of the setting.
There is no default value for the blue setting.
If you want to make changes to the line lock setting, refer to Setting Line Lock on
page 3-2.
If you need to make adjustments in the automatic gain control, refer to Automatic
Gain Control Settings on page 3-3.
If you are finished making changes, press and hold Iris Close, then press Focus
Near or Focus Far to save your changes and exit the utility.
If you want to make changes to other settings, use the Tilt control to move the
highlight bar to Exit, then press Focus Far. The Dome Configuration Menu
appears. Continue with What To Do Next on page 3-8.
5
3-7
Advertisement
Table of Contents
