Advertisement
Quick Links
DeltaDome
1
Programmable
2
Surveillance Camera
Contents
Overview ................................................................1
Command Summary..............................................2
Working with Presets and Patterns........................2
Defining Presets (Shots) ....................................2
Calling Presets ...................................................2
Defining Patterns ................................................2
Running Patterns................................................3
Repeating Patterns.............................................3
Using Other Dome Features ..................................3
Dome Flip ...........................................................3
Resuming Auto Focus / Auto Iris........................3
Resetting the Dome............................................3
Adjusting Vertical Phase.....................................3
Start Dome Configuration Menu.........................3
Controlling Auxiliaries.............................................4
8000-2614-01, Rev. B
Manchester User Instructions
™
Overview
The DeltaDome programmable surveillance
camera supports special menus and programming
features via keystroke combinations. This
document describes how to program and use the
special features supported by the dome when
installed in a Manchester network.
Additional Documentation
The dome installation is covered in the following
document:
DeltaDome Surveillance Camera Installation
Guide, 8000-2616-01
Using the on-screen configuration utility is
described in the following documents:
DeltaDome Surveillance Camera Configuration
Utility Operator's Manual, 8000-2612-02
Delta Dome Surveillance Camera Configuration
Utility Quick Reference Guide, 8000-2613-02
If you need assistance...
Contact the AD/Sensormatic CCTV System
Division at:
1-800-442-2225 (or 914-348-3479).
AD, American Dynamics, DeltaDome, and the AD logo are
trademarks of Sensormatic Electronics Corporation. Other
product names (if any) mentioned herein may be trademarks
or registered trademarks of other companies.
No part of this guide may be reproduced in any form without
written permission from Sensormatic Electronics Corporation.
© Copyright 1998. All rights reserved.
BSL 8/98
AMERICAN DYNAMICS PRODUCTS
1
Advertisement
Related Manuals for American Dynamics AD615
Summary of Contents for American Dynamics AD615
- Page 1 Contact the AD/Sensormatic CCTV System Division at: 1-800-442-2225 (or 914-348-3479). AD, American Dynamics, DeltaDome, and the AD logo are trademarks of Sensormatic Electronics Corporation. Other product names (if any) mentioned herein may be trademarks or registered trademarks of other companies.
-
Page 2: Command Summary
Command Summary The following tables summarize the special commands available when using the dome in a Manchester network. These commands are available when you enter the number listed and press the Set Preset or Call Preset button on the controller. Refer to the instructions in this document for specific information about using the commands. -
Page 3: Resetting The Dome
Running Patterns To run a pattern, do the following: 1. Select the monitor where you want the pattern to run. 2. Use the keypad to the enter the number ( 70 , 71 , or 72 ) associated with the pattern, then press Call Preset. - Page 4 Controlling Auxiliaries Auxiliaries, also called outputs, are external devices, such as lights, audible alarms, or door locks, that can be operated via the camera controller when they are connected to a dome or the video matrix switcher. Auxiliaries can also be initiated automatically in response to an alarm when they have been configured to do so.