Table of Contents
Advertisement
Where To Go Next
Now that you understand how to start and work with the configuration utility, you are ready
to begin changing the settings for your dome. Use the following chart to determine which
chapters you should use next.
Chapter
Chapter 2: Pan, Tilt, and
Zoom Options
Chapter 3: Camera and Lens
Functions
Chapter 4: Alarms, Areas, and
Home Settings
Chapter 5: On-Screen Text
Display Settings
Chapter 6: Language and
Password Settings
Keeping Records
Appendix A, Records, summarizes the default values for each configuration setting. In
addition, it provides space for writing information about the settings you change. Be sure to
keep records for each DeltaDome surveillance camera installed at your facility.
1-6
Topics Covered
Set the "flip" feature (rotates dome 180 )
Set first zoom stop (16X or 24X) and
maximum zoom stop (up to 128X)
Set line lock (prevents vertical rolling when
camera is switched)
Enable automatic or manual gain settings
Enable automatic or manual white balance
settings (red and blue values)
Set alarm actions (preset, pattern, or no
action)
Configure normal input states for alarms
(open or closed)
Send input states to host controller
Set "home" position for dome
Program area boundaries
Program presets
Display or hide dome status information
Display or hide camera, preset, pattern, area
or alarm name information
Display diagnostic information or firmware
version information during dome reset
Assign names to camera, presets, patterns,
areas, and alarms
Reset all names to factory defaults
Set text attributes (outline and translucent
characters)
Choose the language for the menus and
prompts
Set password
Enable or disable password feature
Operator's Manual
Advertisement
Table of Contents
