Control Dampers; Filters; Front-Load Filters - Trane Climate Changer TCFS Nstallation, Operation, And Maintenance

Table of Contents

Advertisement

Component Installation Requirements

Control Dampers

If the damper actuators are not factory mounted install
damper actuators and connecting linkage. Check damper
operation and linkage alignment.
Damper blades should be non-binding. Adjust damper
frame as necessary to ensure free blade movement.

Filters

WARNING
Hazardous Voltage w/Capacitors!
Failure to disconnect power and discharge capacitors
before servicing could result in death or serious injury.
Disconnect all electric power, including remote
disconnects before servicing. Follow proper lockout/
tagout procedures to ensure the power cannot be
inadvertently energized. For variable frequency drives
or other energy storing components provided by Trane
or others, refer to the appropriate manufacturer's
literature for allowable waiting periods for discharge of
capacitors. Verify with an appropriate voltmeter that all
capacitors have discharged.
For additional information regarding the safe discharge
of capacitors, see PROD-SVB06A-EN

Front-Load Filters

Most filters in custom units are installed in sheet metal
frames. Filters are secured with a metal clip. There are
several different styles.
To install filters:
1. Disconnect power to the unit.
2. Open or remove the filter clip.
3. Remove the filter from the rack.
4. Install new filters with the directional arrows pointing
in the direction of airflow.
5. Secure the filter using the appropriate clip for each
filter.
Review
Figure 32
through
the methods for securing the different types of filters.
The filters are often installed in a pre/post filter
configuration. Be sure to note the order of installation.
Note: Filters must have an airtight seal to prevent air
bypass.
32
Figure 35
for an explanation of
Figure 32. C-70 fastener holds 2-inch filter
Figure 33. C-86 fastener (shown) or C-77 fastener holds
4-inch pleated filters
Figure 34. C-70 fastener holds bag filter
Figure 35. C-80 spring fastener secures cartridge filter
CLCH-SVX010A-EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Climate changer tcpa

Table of Contents