Using The Machine With Credits - Saeco Royal OTC SUP060 Operation And Maintenance

Select "Espresso". Press the "OK" button to enter. The
machine starts brewing coffee.
The following screen is displayed:
The "X" under the cup indicates that you can block the
process (still in grinding phase). If you press the "OK"
button at this time, storage is cancelled.
Only when "V" is displayed under the cup you can save
the dose adjustment.
From now on you have to press the "OK" button when
the desired amount of coffee in the cup has been reached.
The "Espresso" button is now programmed. Each time it is
pressed, the machine will brew the same amount that was
just programmed.
This adjustment method is correct for all products apart
from the "AMERICANO". To adjust the length of this
product you have to use the configuration with
parameters. This method allows you to set the beverage
length and water amount values directly by means of the
keypad. This system requires the user to carry out a
subsequent check of the actual quantity of product brewed
in the cup.
All the necessary operating steps are shown below.
Press the "DOWN" button to select an "AMERICANO".
BEVERAGE SETTINGS
Latte Macchiato
milk
AMERICAN COFFEE
Press the "OK" button to enter.
AMERICAN COFFEE
BEVERAGE LENGTH
WATER QUANTITY
Exit
Press the "OK" button to select "BEVERAGE LENGTH".
BEVERAGE LENGTH
Press the "DOWN" or "UP" button to select the desired
value and then let the bar advance. The number on the
side identifies the bar value (in pulses). Then press the
"OK" button to confirm and exit.
Press the "DOWN" button to select the "WATER
QUANTITY" menu.
AMERICAN COFFEE
BEVERAGE LENGTH
WATER QUANTITY
Exit
Press the "OK" button to enter.
WATER QUANTITY
LOW (30%)
MEDIUM (50%)
HIGH (70%)
Press the "DOWN" button or the "UP" button to select
the desired value. Then press the "OK" button to confirm
and exit.
When this phase has been completed, the beverage is
programmed. It is recommended to perform a visual check
of the result.
9.11 Using the Machine with
Credits
This option can be enabled
or disabled by the service
provider.
The machine is designed to manage beverage brewing by
means of a credit system. The number of coffee-based
products brewed is limited to the number of credits
granted by the service provider.
When no credits remain, no more coffee-based products
can be brewed.
The residual credits can be seen on the "Ready for use"
screen, if the "SHOW CREDITS" option was enabled.
English
57