Saeco Royal OTC SUP060 Operation And Maintenance page 47

8.3.4 Password setting
The PASSWORD must be set by the service provider in
order to prevent access by unauthorised personnel who
could change the machine settings and cause malfunctions.
You can set two passwords to access the two different
machine menus.
To set the PASSWORD, proceed as follows:
Switch to machine programming mode as described in
section "Access to the Technical Menu".
Tech Menu
Settings
Statistics
Exit
Select the "SETTINGS" option and press the "OK" button.
Settings
Credits Menu
BEVERAGE SETTINGS
Machine Menu
To select the "MACHINE MENU" option, press the
"DOWN" button.
Settings
Credits Menu
BEVERAGE SETTINGS
Machine Menu
Press the "OK" button to enter. The following screen is
displayed:
Machine Menu
General Menu
Display Menu
Water Menu
Press the "OK" button to access the "GENERAL MENU".
The following screen is displayed:
General Menu
Tone
Ecomode
Stand-by Settings
Scroll the menu using the "Down" button and select the
"USER PW" option to set the user password or the
"TECH. PW" option to set the technician option.
General Menu
Temperature
USER PW
TECH. PW
Press the "OK" button to enter. The following screen is
displayed:
TECH. PW
0
0
To enter the password:
Press the "Up" button or the "Down" button to set the
desired number. Press the "OK" button to move to the
next number.
Repeat the steps until the set password has been entered.
Once the last number is entered, you return to the
previous menu screen.
In case you want to change an already set password, follow
the same procedure.
English
0 0
47