Saeco Royal OTC SUP060 Operation And Maintenance page 70

English
If this option is confirmed,
the cycle
completed. Select "EXIT"
to exit.
Place the cleaning tablet in the brew group and refit the
group in the machine, making sure that all the components
have been inserted and that the door is closed.
After placing the tablet in the brew group, press the "OK"
button to confirm.
PUT BACK THE GROUP
IN THE MACHINE
OK
Put the brew group back into the machine and press the
"OK" button to confirm.
PLACE A CONTAINER
UNDER ALL THE
SPOUTS
OK
Place a container under the coffee dispensing spout and
press the "OK" button to confirm.
Brew Group Clean
70
The machine completes the cycle automatically.
must be
10.2.8
Exit
Lubricate the brew group after approximately 500 cups of
coffee or once a month. The grease to lubricate the brew
group and the complete "Service Kit" can be purchased at
your local dealer or at authorised service centres.
Before lubricating the brew group, clean it under running
water as described in the "Brew Group Cleaning" chapter.
Lubricate the brew group guides using Saeco grease only.
At the end of the cycle,
after performing the rinse
cycle, the machine goes
back to its
operating mode.
It is recommended
remove the group and wash
it under fresh running water.
Ensure that
group is completely dry
before putting it back into
the machine.
Brew group lubrication
To see how many coffees
have been dispensed, see
the "PRODUCTS" menu
in the "STATISTICS" menu
of the tech. menu (see
section "Description
messages
programming menu").
normal
to
the brew
of
in the