Rinse/Self-Cleaning Cycle; Eco-Friendly: Stand-By; Brewing Coffee - Saeco Royal OTC SUP060 Operation And Maintenance

The cycle can be stopped
by pressing the "Espresso"
button.
When the logo is displayed, the machine is ready for use.
If the machine is used for
the first time or after a
long period of inactivity,
contact
Provider to start it up.
9.2

Rinse/Self-Cleaning Cycle

This cycle allows to rinse the internal coffee circuit with
fresh water. The cycle is carried out:
• At machine start-up (with cold boiler);
• During the Stand-by preparation phase (if at least one
coffee-based product has been brewed);
A small amount of water will be dispensed to rinse and
heat all the machine parts. This icon is displayed.
Wait for this cycle to be completed automatically.
Dispensing can be stopped by pressing the "Espresso"
button.
the Service
9.3

Eco-friendly: Stand-by

The machine is designed for energy saving.
The machine will turn off automatically if it is not used for
a set period of time after the last dispensing. This period of
time is set by the service provider in the technical menu.
During the turn-off phase,
the machine will perform a
rinse cycle if a coffee
product has been brewed.
Time can be programmed
according to your needs
(see instructions in chapter
"Programming Menu").
Simply press a button on the control panel to restart the
machine (if the power button is set to "I"). In this case the
machine will go through the rinse cycle only if the boiler is
cold.
9.4

Brewing Coffee

To brew coffee, press:
the "Espresso" button for an espresso;
the "Coffee" button to brew a coffee;
the "Manual Brewing" button to brew a variable length
coffee selected by the user;
the "Americano" button to dispense an American coffee;
Then the brewing cycle starts:
Press the desired button once to brew 1 cup of coffee.
Press the desired button twice consecutively to brew 2
cups of coffee. This function is not available for the
"American" coffee and "Manual Brewing" beverage.
English
49