Saeco Royal OTC SUP060 Operation And Maintenance page 66

English
Rinse the water tank and fill it with fresh drinking water.
Press the "OK" button to confirm.
INSERT TUBE
WITH 1/2 L WATER
Cappuccinatore
OK
Wash the container used for the solution thoroughly and
fill it with 1/2 (half) litre of fresh drinking water which will
be used for rinsing.
Empty the container placed under the dispensing spout.
Insert the suction hose into the container used. Press the
"OK" button to confirm.
PLACE A CONTAINER
SOTTO IL
Cappuccinatore
OK
Place an empty container under the dispensing spout and
press the "OK" button to confirm.
STANDARD CLEAN
The machine performs a Cappuccinatore rinse cycle. The
bar shows the rinsing progress.
Wait until the cycle stops automatically. The machine will
go back to the normal operating cycle.
It is advisable to remove
the Cappuccinatore from
the machine when not
being used, in order to
keep it clean.
66
Here is an explanation of
how to disassemble and
wash the Cappuccinatore
with left-hand fitting. If the
right-hand fitting is installed,
you can carry out the same
operations except that you
will need to remove the
suction tube and insert it
on the opposite side to
that shown here.
Remove the suction tube from the Cappuccinatore.
Remove the chrome-plated cover from the Cappuccinatore.