Hot Water Dispensing; Using The Machine With Credits - Saeco MAGIC M2 Technical Manual

English
Use cold (~5°C / 41°F) milk with a protein
content of at least 3% to ensure
top-quality beverages.
skimmed milk, soy milk or lactose-free milk
may be used depending on individual taste.
Insert the clean tube directly into the milk container.
Insert the cup or glass under the dispenser.
To dispense a beverage with milk tap the icon of the beverage with milk desired. If
the beverages with milk are not visible on the beverage selection screen, tap the
"MILK" icon on the left of the beverage selection screen in the control column and
subsequently tap the icon of the beverage with milk desired.
Danger of burning! Dispensing may be
preceded by small jets of hot water and
steam.
The machine needs time to preheat. Once the warm-up is completed, the machine
starts to dispense the beverage selected. The beverage stops dispensing
automatically when the level set is reached; it is in any case possible to interrupt
the dispensing by tapping the "STOP" icon.
Remove the container and clean it if necessary.
Always remember to store milk in the
fridge when not used.
50
After a preset period of time following the
last beverage with milk dispensing, the
Whole milk, machine automatically rinses the milk
circuit.
9.7
Insert the cup or glass under the dispenser.
To dispense the "HOT WATER" beverage tap the "HOT WATER" beverage icon. If
the "HOT WATER" beverages are not visible on the beverage selection screen, tap
the "HOT WATER" icon on the left of the beverage selection screen in the control
column and subsequently tap the icon of the "HOT WATER" beverage desired.
Danger of burning! Dispensing may be
preceded by small jets of hot water and
steam.
Start the dispensing cycle. The hot water starts to come out of the dispenser. The
hot water stops dispensing automatically when the level set is reached; it is in any
case possible to interrupt the dispensing by tapping the "STOP" icon.
9.8
This option can be enabled or disabled by
the service provider.
The machine is designed to manage beverage brewing by means of a credit system.
the same number of products can be dispensed as there are credits inserted by the
operator. When the credits counter reaches zero, all beverages including milk and
water are prevented. The available credit is displayed in the "ready for use" screen.
Hot water and milk do not decrease the
credits, but if the credit level reaches zero
all beverages are prevented.
Each service provider decides independently how to manage the granting and
recharging of credits to allow the machine to be used.

Hot Water Dispensing

Using the Machine with Credits