Saeco Royal OTC SUP060 Operation And Maintenance page 73

Remove and empty the drip tray. After emptying it put the
drip tray back into place. Press the "OK" button. The
following screen is displayed:
INSERT THE
Cappuccinatore
ALL THE COMPONENTS
OK
Check that the Cappuccinatore is correctly positioned.
Press the "OK" button. The following screen is displayed:
PLACE A CONTAINER
UNDER ALL
THE SPOUTS
OK
Place a large container under the dispensing spouts (hot
water and coffee). Press the "OK" button. The following
screen is displayed:
STEP 2/2
RINSING
Press the "OK" button to pause the operation. Press the
"OK" button again to resume the operation. On
completion, the following screens are displayed:
ACTIVATE
FILTER?
yes
Re-insert the small white filter or water filter based on
how you have chosen to proceed. Then, select "YES" or
"NO" based on the choice made and press "OK". Fill the
water tank again up to the MAX level with fresh drinking
water.
After completing the descaling cycle, empty the containers
used to collect the liquids during descaling. The descaling
solution must be disposed of according to the
manufacturer's instructions and/or regulations in force in
the country of use. Empty the drip tray and place it back.
If you wish to carry out a descaling cycle with the machine
already on, you need to access programming as indicated
in section "Accessing the tech. menu".
Select the "SETTINGS" option and press the "OK" button.
To select the "MACHINE MENU" option, press the
"DOWN" button.
Press the "OK" button to enter.
Press the "DOWN" button until the "DESCALING"
option is selected.
Press the "OK" button to enter.
At this point, all the already described screens of the
descaling cycle will follow.
no
Tech Menu
Settings
Statistics
Exit
Settings
Credits Menu
BEVERAGE SETTINGS
Machine Menu
Settings
Credits Menu
BEVERAGE SETTINGS
Machine Menu
Machine Menu
General Menu
Display Menu
Water Menu
Machine Menu
Display Menu
Water Menu
Descaling
English
73