Chapter 3 - Commissioning
Figure 3-7: SNMP Configuration
SNMP Configuration: The list of currently defined communities is
displayed in the Community table. To add a new community, click 'Add
Community'. The Community configuration screen will appear as shown
below.
To edit an existing community, select the community from the pull
down menu and click 'Edit'. The Community Configuration screen will
appear as shown below.
To delete an existing community, select the community from the pull
down menu and click 'Delete'. It is not possible to delete the "public"
SNMP community. However, its access level can be changed.
Figure 3-8: SNMP Community Configuration
BreezeACCESS LB System Manual
3-10