Appendix C - CLI Commands
General Information
Command
gateway
ipaddr
ipmask
macaddr
master
rflink
starttime
swver
sysdetails
sysname
ubrate
C-4
Table C-2: General Information
Description
Specifies the IP address of the default router
Specifies the IP address used by the local
terminal
Specifies the IP Subnet Mask used by the local
terminal
Specifies the Ethernet MAC address used by local
terminal
Indicates whether the system is serving as
master or slave
Yes: RF link up / No: RF link down
Specifies the time elapsed since the system
started
Specifies the operating software version
Specifies the location, telephone #, contact
information, etc.
Identifies the local terminal
Indicates the system's current uncoded burst
rate
BreezeACCESS LB System Manual