Community Configuration; Trap Configuration - Alvarion BreezeACCESS LB System Manual

Community Configuration

Community Name: Enter the SNMP community name in this field.
Community Access - Read: Check 'Read' to grant read access
permission to members of this community
Community Access - Write: Check 'Write' to grant write access
permission to members of this community
Community Access - No Access: Uncheck 'Read' and 'Write' options if
you wish to prevent members of this community from receiving
responses to their SNMP requests.

Trap Configuration

Trap Enable: When the SNMP Agent in the BreezeACCESS LB detects
an error condition, a message known as a trap is sent. A Trap Host is
an IP workstation/server that is set up to receive SNMP trap messages.
Checking this option enables trapping.
Trap Destination (IP Addresses [n]}: Enter the IP addresses of the
Trap Host in dotted decimal format. The maximum number of
destinations is four.
Preliminary Configuration
3-11