Ai-Shift; If A Message About A Shift Operation Is Shown - Lexus LC500 Manual

Hide thumbs Also See for LC500:
Table of Contents

Advertisement

the multi-information display and the vehi-
cle will go into transmission protection
mode automatically. Have the vehicle
inspected by your Lexus dealer.
When driving with dynamic radar cruise
control with full-speed range activated
Even when performing the following
actions with the intent of enabling engine
braking, engine braking will not be acti-
vated because dynamic radar cruise con-
trol with full-speed range will not be
canceled.
While driving in the D position, down-
shifting to 9, 8, 7, 6, 5 or 4.
When switching the driving mode to
sport mode while driving in D position.
(P.203)
Restraining sudden start (Drive-Start
Control)
P.137

AI-SHIFT

The AI-SHIFT automatically selects the suit-
able gear according to driver performance
and driving conditions.
The AI-SHIFT automatically operates when
the shift position is in D. (Shifting the shift
position to M cancels the function.)
If a message about a shift operation is
shown
To prevent the shift position from being
selected incorrectly or the vehicle from
moving unexpectedly, the shift position may
be changed automatically or operating the
shift lever may be required. In this case,
change the shift position following the mes-
sages on the multi-information display.
After recharging/reconnecting the bat-
tery
P.279
Customization
Settings (e.g. reverse warning buzzer) can
be changed. (Customizable features:
P.367)
4-2. Driving procedures
WARNING
When driving on slippery road sur-
faces
Do not accelerate or shift the shift posi-
tion suddenly.
Sudden changes in engine braking may
cause the vehicle to spin or skid, resulting
in an accident.
NOTICE
Situations where shift control system
malfunctions are possible
If any of the following situations occurs,
shift control system malfunctions are
possible.
Immediately stop the vehicle in a safe
place on level ground, apply the parking
brake, and then contact your Lexus
dealer.
When the warning message indicating
the shift control system appears on the
multi-information display.
The display indicates that no shift posi-
tion is selected for more than a few
seconds.
151
4

Advertisement

Table of Contents
loading

Table of Contents